| |
|
A. |
Specifications |
|
|
|
Character Sets |
DotsPlus™
Braille ( U.S. Standard, German,
Italian, French, Spanish ) | |
Paper Feed Method |
front load
continuous form
stack sheet feeder
optional
additional front
pull tractor optional | |
Paper Maximum
Thickness |
Maximum 0.635mm
(0.025 inches) | |
Paper Width |
up to 17 inches | |
Power Supply
Universal
|
From 100 to 230 VAC
(+ 10/-15%)
Current rating: 2.9
to 1.3 A
Frequency:
50/60 ? 1Hz | |
Power Consumption |
Standby 28 W;
Average Print 100 W | |
Reliability
Requirements
Workload
Service Life |
35,000 pages/month
5 years or 10000
hours | |
Embosser Dimensions
Width
Depth
Height
Weight |
26.38 in. (670 mm)
18.11 in. (460 mm)
12.6 in. (320 mm)
44.35 lbs. (21 kg) | |
Interfaces
Parallel
Serial
USB |
Receive buffer: 64
kByte
Centronics compatible bi-directional (IEEE1284
nibble mode)
36 pin connector, 8
data-bits
RS-232C, 25 pin
connector
Baud rate: 2400 to 38400 bps,
7/8 data bits
Flow control:
XonXoff, RTS/CTS
Universal Serial Bus
Revision 1.1 compliant interface
Non-isochronous
transfer rates up to 1.5Mbps | |
Operating Conditions
Temperature
Relative Humidity |
10? to 40? C
10% to 90% RH (non
condensing) |
|
| |
|
B. |
Software Driver |
|
|
ViewPlus,
powered by Tiger, driver designed for Windows 2000/XP is included with
your ViewPlus embosser. Refer to the
installation section for instructions.
|
| |
