ViewPlus Pro Embosser Manual

Table of Contents
I. Introduction
	-	Preface
	-	FCC Compliance Statement
	-	Safety Instructions
II. General Information
	-	Specifications
	-	Software Driver
III. Installation
	-	Items in Box
	-	Unpacking
	-	Cable Attachment
	-	Software Installation
IV. Operator Panel
	-	Function
	-	Display Messages
	-	Main Menu
	-	Embosser Mode
	-	Advanced Menu
	-	Custom Menu
	-	Alignment Menu
	-	Interface Menu
V. Paper Handling
	-	Paper Loading Standard Tractor Feed Paper
	-	Other Options
VI. Braille
	-	Fonts
	-	ViewPlus Tiger Software Suite
VII. Printing First Documents
	-	Printing
	-	Printer Properties
	-	Interpoint Printing
	-	Other Printing Features
	-	Embosser Mode Settings
VIII. Accessories and Support Packages
	-	List of Accessories
	-	Other Software Packages
	-	Training and Support Packages
IX. Maintenance and Warranty
	-	Extended Warranty and Maintenance Plan
	-	Maintenance
	-	Warranty

Chapter V: Paper Handling


A.	Paper Loading Standard Tractor Feed Paper

	This tractor feeder comes installed on your ViewPlus Pro and is ready to use. Press the Online button to take the embosser off line. Unlock tractor flaps on both sides to reveal the tractor teeth. Shows the tractor feeder with left flap open and right flap closed Place the left side of the paper into the left tractor and close the tractor flap. Do not adjust the left tractor position. Shows the loading of tractor feed paper If necessary adjust the right tractor position to fit into the right side of the paper: release the locking lever on the side of the tractor. slide the tractor to a position so it lines up with the holes in the paper. insert the paper into the tractor and close the flap. adjust the tractor so that the paper is tight. engage the locking lever. adjust paper supports so that there is an equal distance between the supports and the tractors. Shows the tractor feed paper loaded Close cover. Press Load on the operator panel. The paper will advance until it reaches the ready position. Press Online again to take the embosser to ready mode.

B.	Other Options

	Additional paper handling accessories may be purchased for the ViewPlus Pro. They are: Stack Paper Feeder Pro Embosser Ink Attachment Extra Tractor Feeder Installation and operation instructions will be sent with the accessories.