Remove your
IVEO Touchpad from the box. It is packaged in a plastic bag which is taped
closed on one end. Lift the tape to open the bag and remove the Touchpad from
the bag. Included with your Touchpad is a USB cable in a smaller, resealable
bag. Remove the cable from that bag. Plug the square end of the cable into the Touchpad
and the rectangular end of the cable into a USB port on your computer.
The
IVEO Touchpad is oriented landscape. Place the Touchpad on a level, flat
surface like a desk, or on your lap. The side with the clamp should be on the
left and the USB plug should be at the back of the Touchpad, away from you. | 
